Customer Case | Industrial PC With Expansion Slots for an Autonomous Driving Test Vehicle: From Three Slots to Seven
2026-10-21
Table of Contents
- I. Introduction
- II. Why three slots were not enough for the test vehicle
- III. What changed in the automotive embedded computer
- IV. How the test vehicle can keep network and card connections in one host
- V. What to check for a similar autonomous driving test vehicle
- VI. Questions about this test vehicle’s PC
Introduction
Introduction
An autonomous driving test vehicle needed an in-vehicle PC for LiDAR data, vehicle communication, a 1-to-4 expansion card, and a GPU for graphics and AI processing. The customer’s card plan required at least five standard PCIe slots. The initially selected SIN-3312-Q670E had three, so the customer changed to the seven-slot SIN-3079-Q670E.
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
Why three slots were not enough for the test vehicle
The first industrial PC for the autonomous driving test vehicle, SIN-3312-Q670E, offered one PCIe x16 Gen3 slot and two PCIe x8 Gen3 slots. That gave the test team three standard slots. Its revised plan required at least five for the 1-to-4 expansion card, a CAN card, a GPU, and other test hardware. The slot count, rather than the processor, became the selection limit.

What changed in the automotive embedded computer
What changed in the automotive embedded computer
What changed in the automotive embedded computer
What changed in the automotive embedded computer
What changed in the automotive embedded computer
What changed in the automotive embedded computer
The test vehicle moved to SIN-3079-Q670E, an automotive embedded computer with seven standard PCIe slots. Both candidate PCs use the Intel Q670E platform and support 12th to 14th Gen Intel Core desktop processors and up to 64 GB DDR5 memory. The practical change for this test plan was the number and layout of card positions.
|
Selection point
|
Initial SIN-3312-Q670E
|
Selected SIN-3079-Q670E
|
|---|---|---|
|
PCIe x16-size slots
|
1, wired for x16
|
2, each wired for x8
|
|
PCIe x8-size slots
|
2, each wired for x4
|
3, each wired for x4
|
|
PCIe x4-size slots
|
None
|
2, each wired for x2
|
|
Standard PCIe slots
|
3
|
7
|
|
Chassis dimensions
|
157 × 280 × 188 mm
|
241 × 280 × 188 mm
|
For this autonomous driving test vehicle, seven physical slots clear the five-slot minimum. The card list still needs a slot-by-slot check: an x16-size connector may provide fewer electrical lanes. The two full-size Mini-PCIe positions on each PC are separate and do not count toward the five standard PCIe slots.


How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
How the test vehicle can keep network and card connections in one host
The SIN-3079-Q670E provides one Intel I226-IT 2.5GbE port and one Intel I219-LM Gigabit port. These give the autonomous driving test vehicle two onboard wired connections to plan for LiDAR data and the test network, while standard PCIe positions remain available for the CAN card, 1-to-4 expansion card, and GPU. The exact card assignment depends on each card’s physical size, lane demand, power, and cooling requirements.


What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
What to check for a similar autonomous driving test vehicle
-
List every PCIe card planned for the vehicle, including the GPU, CAN card, and 1-to-4 expansion card.
-
Check each card against the slot’s physical size and wired lanes; do not judge by the connector shape alone.
-
Reserve 241 × 280 × 188 mm for the selected seven-slot chassis and verify mounting, GPU power, and airflow in the test vehicle.
-
Plan how the 2.5GbE and Gigabit ports will connect the LiDAR side and test network.
For other chassis and I/O options, see SINSMART embedded computer range. The range page is a category guide; the SIN-3079-Q670E configuration in this case should be checked separately.
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Questions about this test vehicle’s PC
Q1:What should change when three PCIe slots are not enough?
For this autonomous driving test vehicle, the five-slot minimum ruled out the three-slot SIN-3312-Q670E. The seven-slot SIN-3079-Q670E provides room for the planned card set, subject to card-level fit and power checks.
Q2:How do the two PCs’ standard slots differ?
The initial test-vehicle PC has one x16-size and two x8-size slots. The selected PC has two x16-size, three x8-size, and two x4-size slots. Physical size and electrical lanes differ, so each card still needs a match.
Q3:Can Mini-PCIe count toward this test vehicle’s five-slot minimum?
No. This test vehicle’s minimum refers to standard PCIe slots. The two full-size Mini-PCIe positions are a different connector format and are excluded from the three-versus-seven comparison.
Q4:Which network ports are available for LiDAR and the test network?
The selected SIN-3079-Q670E has one 2.5GbE port and one Gigabit port. The test team can assign these two wired connections to its LiDAR and network plan after checking each device’s bandwidth and protocol requirements.
Q5:Can the CAN card and GPU be planned in the same test host?
The selected PC has seven standard PCIe positions for the autonomous driving test vehicle’s multi-card plan. The CAN card and GPU can be planned in one host if their required slot sizes, lanes, power, and cooling fit the final configuration.
Need a slot-by-slot review for an autonomous driving test vehicle? Send SINSMART the card list, LiDAR interfaces, and chassis limits to discuss an in-vehicle PC configuration.
LET'S TALK ABOUT YOUR PROJECTS
- sinsmarttech@gmail.com
-
3F, Block A, Future Research & Innovation Park, Yuhang District, Hangzhou, Zhejiang, China
Our experts will solve them in no time.

Rackmount PC
Embedded Computing
Industrial Portable Computers
Rugged Tablets
Rugged Laptop
Industrial Panel PC
Rugged Handheld
Advantech Industrial PC