WhatsApp
Request a Quote
Leave Your Message
Industrial Embedded Computer for Signal-Quality Testing: Why 12 Native RS232 Ports Fit
Customer Stories

Industrial Embedded Computer for Signal-Quality Testing: Why 12 Native RS232 Ports Fit

2026-11-04 11:31:42

A systems integrator building equipment to test and monitor signal quality in communication networks needed to connect more than ten serial devices to one computer. Its existing setup did not have enough serial ports. Connections became harder to organize, wiring was untidy, and the integrator was concerned about system stability.

The choice came down to two configurations: a higher-performance computer with a serial expansion card, or a serial port computer with enough RS232 ports built in. The integrator chose the SIN-1142-J1900 because its 12 native RS232 ports met the connection requirement without an added card.

Why the communication testing system needed more serial ports

Communication testing and transmission systems may connect communication modules, signal analyzers, and sensors for data collection, protocol conversion, and system monitoring. In this project, the integrator’s equipment was used to check signal quality across a communication network. Although its installation environment was relatively stable, connecting the devices was complicated.

The existing industrial computer could not provide enough serial connections for the devices the integrator needed to attach at the same time. Adding connections around that limit made the system less integrated and its cabling harder to manage. The requirement was therefore specific: more than ten serial ports on a computer suitable for the signal-quality testing system.

Illustration of a communication signal path
Illustration of a communication signal path; not the customer's documented site topology.

The two industrial embedded computer configurations considered

SIN-1142-J1900: native serial ports

The SIN-1142-J1900 configuration used an Intel J1900 quad-core processor, 8 GB DDR3L memory, and a 500 GB SSD. It provided 14 COM interfaces, including 12 standard RS232 ports, plus two Gigabit Ethernet ports. The configuration supported Windows 7 and Windows 10.

Those built-in RS232 ports let the integrator connect the required serial devices without buying, installing, and configuring a separate serial expansion card. This was the closer match when port count and budget mattered more than higher processor performance. The selected computer also used a fanless design.

SIN-3026K-1165: higher computing performance with expansion

The other configuration considered for this project used an Intel Core i7-1165G7 processor, 16 GB DDR4 memory, and a 500 GB SSD. It had six COM ports built in. A four-port RS232 PCIe card, model ETX-X4X16-DT, brought the proposed configuration to ten serial ports. It included a trial Windows 10 64-bit image.

That arrangement offered more processing power for work such as complex algorithms or high-definition video. As proposed, however, its ten serial ports did not meet this integrator’s requirement for more than ten. It remained a useful comparison for a different project that needs ten ports and places greater weight on computing performance.

Why the integrator selected 12 native RS232 ports

The integrator compared the connection requirement with its budget and selected the SIN-1142-J1900. Its 12 built-in RS232 ports cleared the more-than-ten-port requirement. The higher-performance alternative, with its proposed expansion card, stopped at ten.

For this signal-quality testing system, the native-port layout also meant one less expansion card to install and manage. It simplified the connection layout while retaining two Gigabit Ethernet ports for network connections. The decision was driven by the number of devices that had to be connected, rather than by choosing the faster processor in isolation.

What changed after the system went live

After the SIN-1142-J1900 was put into use, the customer reported stable operation and no noticeable delay in data collection. The customer also reported less debugging time related to device connections.

For another communication testing system, the first check is the actual number and type of serial connections. An expansion card can be appropriate when its total port count is sufficient and more computing power is needed. When the system needs more than ten RS232 connections, a native multi-port industrial embedded computer may provide a simpler starting configuration. SINSMART’s embedded computer range shows the broader product format, while the exact port map must be matched to the devices in the project.

Frequently asked questions

Should a system with more than ten serial devices use native ports or an expansion card?

Start with the number of devices that must connect at the same time and the required serial standard. In this case, 12 native RS232 ports met the requirement without occupying a PCIe slot or adding a serial-card driver. An expansion card is still an option when the resulting port count, slot availability, driver support, and processor performance suit the project.

Can a fanless serial port computer be used in a hot or dusty location?

This customer’s installation environment was relatively stable. For a similar signal-quality testing system in a hotter or dustier location, a fanless aluminum enclosure removes a cooling fan that could collect dust or fail. The computer’s specified operating-temperature range and enclosure must still match the actual site. If the project requires operation from −20°C to 60°C, that range should be specified and confirmed for the chosen configuration.

What warranty and support are available?

SINSMART provides a one-year warranty for the industrial computer. Remote assistance and repair arrangements can be discussed for the destination and order. Response times and on-site service should be confirmed in the applicable purchase terms.

What information should I provide if I do not know which computer to choose?

For a communication signal-quality testing system, provide the number of devices, each device’s RS232 or other interface requirement, the software and operating system, expected processing workload, installation space, and operating environment. These details allow SINSMART to compare a native multi-port computer with an expansion-card configuration against the actual connection requirement.

Discuss a multi-serial configuration for your system

If your communication testing equipment must connect more than ten serial devices, send SINSMART the device list, interface types, software requirements, and installation conditions through the project inquiry page. The port count and processor configuration can then be checked against the same requirements that drove this project’s selection.

Related Products

LET'S TALK ABOUT YOUR PROJECTS

  • sinsmarttech@gmail.com
  • 3F, Block A, Future Research & Innovation Park, Yuhang District, Hangzhou, Zhejiang, China

Our experts will solve them in no time.