Rorohiko Whakamau Whatanga
Rorohiko Whakauru
Ngā Rorohiko Kawe Ahumahi
Papa Pakari
Pona Pūkoro Pakari
Rorohiko Paewhiri Ahumahi
Ringaringa pakari
Rorohiko Ahumahi Advantech
Ngā Whakamahinga Rorohiko Whakauru: Ngā Whakamahinga Matua puta noa i te Hanganga, te Hauora, me te Waka
2024-08-13 16:29:49
Rārangi Kaupapa
- 1. He aha te Rorohiko Whakauru?
- 2. Ngā Hanganga Rorohiko Whakauru me ngā Āhuatanga
- 3. Ngā Taupānga Rorohiko Whakauru Noa mā te Rāngai
- 4. Ngā Whakamahinga Matatau me ngā Auahatanga Hou
- 5. Ngā Painga, Ngā Herenga me ngā Here Hoahoa
- 6. Ngā Pūnaha Āhuatanga Hononga
- 7. Me pēhea te whiriwhiri i te rorohiko whakauru tika?
- 8. Rorohiko Whakauru me te Rorohiko Whaiaro Noa
- 9. Te Tirohanga me te Whakamutunga o te Ao
- 10. Ngā Pātai Auau
1. He aha te Rorohiko Whakauru?
He rorohiko motuhake te rorohiko tāmau kua whakauruhia ki roto i tētahi pūnaha miihini, hiko rānei nui ake. Kāore i hangaia kia taunekeneke tika atu ki a ia pērā i te pona rorohiko, i te papamahi rānei, engari hei whakahaere i ngā mahi wā-tūturu i roto i ngā tono pēnei i te aunoatanga ahumahi, ngā whare atamai, ngā taputapu hauora, me ngā waka.
Ngā āhuatanga matua:
- Ngā mahi motuhake
- Āhua kiato
- He iti te whakamahinga hiko
- Mahi ā-wā-tūturu
- Te roa o te ora me te pono nui
2. Ngā Hanganga Rorohiko Whakauru me ngā Āhuatanga
2.1. Ngā Āhua Whakauru Noa
Kei te wātea ngā rorohiko tāmau i roto i ngā whakatakotoranga ā-tinana hei whakatutuki i ngā herenga whakahaere rerekē:
-
Ngā PC Pouaka:
Kiato me te kore pā, he tino pai ēnei mō ngā taiao ahumahi uaua. Ngā rorohiko iti ahumahi he maha ngā wā Reriwe DIN- rānei Kua whakamau ki te VESA i roto i ngā tautuhinga wheketere. -
Ngā PC Paewhiri:
Rorohiko Paewhiri Ahumahi Whakakotahitia he mata pa-mata me te tukatuka whakauru. He mea noa i roto i Ngā HMI (Atanga Tangata-Mīhini) mō ngā mahi aunoa, ngā kiosks hauora, me ngā mana whakahaere moana. -
Ngā Rorohiko Papa Kotahi (SBC):
Whakaurua te PTM, te mahara, te I/O, me te rokiroki ki runga i te papa kotahi. He rongonui i roto i ngā tono taha kei reira te wāhi me te utu he mea nui (hei tauira, Raspberry Pi, BeagleBone). -
Pūnaha-i-runga-i-te-Mōwae (SoM) me Rorohiko-i-runga-i-te-Mōwae (CoM):
Mono atu ki tētahi papa kawe, e tuku ana i te āhua rerekē me te whakapai ake i te ngāwari. Whakamahia i roto i te ngā hoahoa ahumahi me ngā hoahoa motuka ritenga.
Ngā Whakaaro Matua mō te Hanganga
| Momo Hanganga | Whakaahuatanga | Ngā Whakamahinga Noa |
|---|---|---|
| Pūnaha-i-runga-i-te-maramara (SoC) | Kua whakauruhia te PTM, te GPU, te RAM, me te I/O ki roto i te maramara kotahi | Ngā taputapu kaihoko, ngā mea mau, te IoT iti-mana |
| PTM e hangai ana ki te hononga | PTM ā-pūrere me ngā RAM motuhake me ngā kōwae rokiroki | Ngā rorohiko ahumahi, ngā pūnaha mahi-teitei |
| Hoahoa Kore-Pā | Te whakamatao kore mahi me ngā whakamahana, ngā ārai rānei | Ngā taiao puehu nui, ngā taiao wiri rānei |
| Ngā Hanganga Pakari | He āputa whānui-mahana, ātete-ru, ātete-wai (IP65+) | Ngā rāngai kawe waka, maina, tiaki whenua |
2.2. Te Kōwhiri i te Āhua Tika
Ko te whakatau e whakawhirinaki ana ki ētahingā taurangi motuhake ki te tono:
Ngā herenga wera(hei tauira, kāore he pā mō ngā wāhi wahangu, puehu rānei)
Wāhi wātea(whakanoho ki te kāpata, whakanōhia ki te ringaringa, whakanōhia ki roto i te pakitara)
Ngā hiahia tāuru/tāpui(USB, COM, LAN, GPIO, pahi CAN)
Pūtake hiko(He mea noa te whakauru 9–36V DC i roto i ngā whakatinanatanga pūkoro/waka)
Ngā Tiwhikete(hei tauira, CE, FCC, UL, MIL-STD-810G)
3. Ngā Taupānga Rorohiko Whakauru Noa mā te Rāngai
3.1. Aunoatanga Ahumahi me te Hanga
I roto ngā taiao ahumahi, ko ngā rorohiko tāmau kei te kaupapa matua o:
-
Ngā Kaiwhakahaere Arorau Ka Taea te Whakahōtaka (PLC) me Ngā pūnaha SCADA
-
Ngā ringa karetao me Mīhini CNC
-
Ngā pūoko atamai me ngā kuwaha ahumahi
Ka tautokohia e ēnei pūnaha mana whakahaere-wā-tūturu, e āhei ai ngā wheketere ki te whakatutuki tiaki matapae, aunoatanga tukanga, me tātaritanga taha.
3.2. Waka me te Waka
Ka whakauruhia e ngā waka hou ngā tini rorohiko kua whakauruhia. Kei roto i ēnei:
-
Ngā Wāhanga Whakahaere Mīhini (ECU) mō te whakahaere wahie
-
Ngā Pūnaha Āwhina Taraiwa Matatau (ADAS) hei karo i te tukinga
-
Ngā Pūnaha Whakamōhio me te Whakatere
-
Ngā Pūnaha Whakahaere Pūhiko (BMS) i roto i ngā waka hiko
Me tutuki i ngā rorohiko whakauru waka ISO 26262 ngā paerewa haumaru me te manawanui ru, wiri, me ngā piki me ngā heke o te ngaohiko.
3.3. Ngā Pūrere Hauora me ngā Taputapu Hauora
Mai i ngā taputapu hōhipera ki ngā taputapu whaiaro hei mau, ka whakarite ngā pūnaha whakauru:
-
Te aroturuki tonu i te tūroro (te tere o te manawa, te hāora, te hukahuka)
-
Ngā pūnaha whakaahua me te tātaritanga (MRI, ultrasound)
-
Ngā papu werohanga me ngā karetao pokanga
3.4. Ngā Hikohiko Kaihoko me ngā Kāinga Atamai
Kei ngā wāhi katoa o te kāinga ngā rorohiko whakauru:
-
Ngā whakamahana atamai
-
Ngā kāmera haumaru
-
Ngā kaiawhina reo
-
Ngā taputapu me ngā atanga pā
He iti te mana e whakamahia ana e ēnei taputapu Ngā SoC e hangai ana ki te ARM, i arotauhia mō hononga ahokore, te iti rawa o te whakaroa, me te whakaurunga kapua.
3.5. Hokohoko, Pēke me te Hanganga
I roto i ngā taiao e anga atu ana ki te marea, ka akiakihia e ngā pūnaha tāmau:
-
Ngā tohu mamati
-
Ngā kiosī utu-whaiaro
-
Ngā teihana hoko
-
Ngā mīhini ATM me ngā mīhini tikiti
Me whai ēnei pūnaha ngā atanga pā, tātaritanga mamao, me ngā whare ārai-kino mō te wā mahi korekore.
3.6. Te Rererangi, te Waea me te Tiaki
I roto i ngā taiao nui te tūponotanga, me mau tonu ngā rorohiko whakauru:
-
Teitei rawa me te pāmahana
-
Te pokanoa hikohiko teitei
-
Ngā whakaritenga haumarutanga raraunga pakari
4. Ngā Whakamahinga Matatau me ngā Auahatanga Hou
I te neke haere o ngā ahumahi ki ngā pūnaha motuhake, ki te rorohiko taha, me te whakatau kaupapa e whakamahia ana e te AI, kāore ngā rorohiko tāmau e herea noa ki ngā mahi whakahaere māmā. He mea nui rātou inaianei mō ngā tono taha atamai mai i ngā tātaritanga wā-tūturu ki te ako mīhini ā-rohe. Mā tēnei huringa ka hangaia he tūāpapa tāmau kaha ake, iti ake, me te penapena pūngao.
4.1. Te Matawai Pūtaiao me te Whakatau Whakauru
Ka taea e ngā rorohiko whakauru te whakahaere inaianei Ngā tauira AI ā-rohe, ka whakakorea te hiahia ki te tuku raraunga ki te kapua. He mea nui tēnei mō ngā tono e hiahia ana ki:
-
Whakaroa iti (hei tauira, te mōhio ki ngā mea i runga i te raina whakaputa)
-
Te tūmataitinga raraunga (hei tauira, i roto i ngā taiao hauora, tiaki rānei)
-
Ngā mahi tuimotu (hei tauira, ngā waka rererangi korehau, ngā pūoko mamao rānei)
4.2. TinyML me te Rorohiko Āta Wā
TinyML e pā ana ki te whakatinanatanga o ngā tauira ML māmā ki runga ngā pūmana iti-kaha tino itiHe pai rawa atu ēnei pūnaha mō e whakahaerehia ana e te pākahiko rānei ngā taputapu kohikohi pūngao pērā i:
-
Ngā aroturuki whakapakari tinana e taea te mau
-
Ngā rama aroturuki kararehe mohoao
-
Ngā pūoko ahuwhenua atamai
4.3. Ngā Pūnaha Whakauru i roto i ngā Robotics me ngā Waka Aunoa
Ko te pikinga ake o ngā karetao pūkoro motuhake (AMR), ngā waka rererangi kore-arataki, me ngā AGV (ngā waka ārahi aunoa) kei te whakateretere i te hiahia mō te whakakotahitanga pūoko wā-tūturu, Ngā rauropi SLAM, me te whakamahere ara — e tautokona ana katoa e ngā rorohiko pakari kua whakauruhia.
Me tuku e ēnei tūāpapa:
-
Rorohiko mahi-teitei i te rahi iti
-
Maha ngā whakaurunga kāmera, LIDAR, me ihu whakaurunga
-
Tautoko mō ROS (Pūnaha Whakahaere Robot)
4.4. Hononga me te Hanganga Tapa Whakakore-pokapū
Te whakatipuranga e whai ake nei ngā rorohiko whakauru kua hangaia hei mahi hei ngā pokapū raraunga moroiti, e tuku ana:
-
5G, Ipurangi Ahokore 6, rānei LPWAN tautoko
-
I runga i te waka te whakarite ipu (hei tauira, Docker, Kubernetes Lite)
-
Hototahi ki MQTT, OPC UA, me Modbus mō te IoT ahumahi
5. Ngā Painga, Ngā Herenga me ngā Here Hoahoa
5.1. Ngā Painga Matua o ngā Rorohiko Whakauru
Te Pono me te Wā Mahi
- Ātete ki te wiri, te puehu, te wai, me te pokanoa hikohiko.
- Ka taea te mahi pumau i roto i ngā awhe pāmahana whānui (mai i te -20℃ ki te 60℃).
- I whakamātauhia kia tutuki ai ngā paerewa ā-ahumahi mō te pono mō te wā roa.
Āhua Kiato
Te Whakamahinga Mana Iti
- He iti te mana o ngā tukatuka, ā, he hoahoa taputapu kua arotauhia hei whakaiti i te whakamahinga pūngao me te whakaputa wera.
- Ka whakarite kia roa te mahi, kia pumau hoki, ā, he mea tino pai mō ngā mahi kāore he tangata e tiaki.
Tukatuka Wā-Tūturu
- Hototahi ki ngā pūnaha whakahaere wā-tūturu (RTOS) me ngā tūāpapa pūmanawa ahumahi.
- Ka tuku urupare wā-tūturu mō ngā mahi aunoatanga, ngā mahi karetao, me ngā tono whakahaere waka.
Ngā Tiwhikete Roa me te Ahumahi
- I hangaia ki ngā wāhanga ā-ahumahi hei whakarite kia roa ake ngā huringa tuku.
- He roa te ora ratonga me te iti o ngā utu tiaki.
Whakamatao Kore-Pū (Te Whakamarara Wera Ā-Whaiaro)
- E whakamahi ana i ngā ārai konumohe koranu, i ngā hanganga wera motuhake rānei hei tohatoha pai i te wera.
- Ka whakakore i te haruru me te wiri, ka whakaiti i te urunga mai o te puehu, ā, ka whakaroa i te roa o te ora o te taputapu.
Ngā Atanga Whai Rawa me ngā Kōwhiringa Whakawhanui
- E whakarato ana i ngā atanga ahumahi kanorau pērā i te USB, LAN, COM, GPIO, CAN, me te PCIe.
- Ka tautoko i te whakaritenga me te whakawhānui kia tutuki ai ngā whakaritenga tono motuhake.
Whānuitanga o ngā tono
- Te aunoatanga ahumahi, te pūngao, te hiko, te kawe waka, te whakahaere ratonga, te hauora, te haumarutanga, te ahuwhenua, me te taraiwa motuhake.
- He mea nui tēnei i roto i ngā mara hou pēnei i te IoT, te hanga atamai, me ngā tāone atamai.
5.2. Ngā Herenga Noa me ngā Tauwhitinga
| Te Herenga | Whakaahuatanga |
|---|---|
| Ngā Rauemi Rorohiko Iti | Kāore he GPU (ki te kore he mea motuhake); kāore e pai mō te tukatuka nui |
| He uaua ki te whakahou | Kāore pea e taea te whakawhāiti, te kore rānei e wātea ngā whakahōutanga OTA (over-the-air) |
| Te iti o te ngāwari | I hangaia mō tētahi whakamahinga motuhake; kāore e taea te whakamahi anō i ngā wā katoa |
| Ngā Herenga Wera | Ka arahi pea te whakamatao kore mahi ki te whakawhāiti i raro i te kawenga nui |
| Te Uauatanga o te Whakawhanaketanga | Me whai pūkenga motuhake te hōtaka motuhake-pūmārō (pūmārō, RTOS) |
5.3. Ngā Herenga Hoahoa Matua i roto i te Hangarau Whakauru
Me mahi ngā pūnaha tāmau i roto i tētahi pūnaha kua tautuhia pūmau SWaP-C kōpaki:
-
RahiMe uru ngā taputapu ki roto i ngā ārai, i ngā papaaho whakahaere, i ngā whare mīhini rānei.
-
TaumahaHe mea tino nui i roto i waka, rererangi, me ngā mea ka taea te mau.
-
ManaHe iti noa te kaha e wātea ana (e whakahaerehia ana e te pākahiko, e whakahaerehia ana e te rā).
-
UtuHe iti te tahua mō ngā taputapu kaihoko me ngā taputapu ahumahi i hangaia papatipu.
5.4. Ngā Whakaaroaro Taiao
He maha ngā wā ka pāngia ngā rorohiko whakauru e ngā āhuatanga kino. Ko ngā whakaaro hoahoa pea ko:
-
Awhe pāmahana whakahaere–40°C ki te +85°C mō te whakamahi i waho, i roto rānei i te waka
-
Te parenga o te urunga: Whakatauranga IP65/IP67 mō te ātete ki te puehu me te wai
-
Te manawanui ki te ru me te wiriKua whakamanahia ki te MIL-STD, ki te EN50155 rānei
6. Ngā Pūnaha Āhuatanga Hononga
6.1. Ngā Atanga Hononga ā-Tino
Ka tautokohia e ngā rorohiko whakauru te whānuitanga o ngā Ngā atanga I/O hei whakauru atu ki ētahi atu pūnaha taputapu, pūoko, kaiwhakahaere, me ngā pūmana.
-
Ngā tauranga raupapa (RS-232/422/485)Tautoko tawhito i roto i te mana whakahaere ahumahi, ngā pūoko, ngā mita
-
USBMō ngā taputapu tāpiri, ngā kāmera, ngā taputapu takiuru raraunga
-
Itarangi (1G/2.5G/10G)He pou tuara mō te aunoatanga ahumahi me te whakawhiti raraunga ā-rohe
-
Pahi CAN: E whakamahia whānuitia ana i roto i waka me karetao mō te whakawhitiwhiti kōrero ā-wā
-
GPIOTe whakahaere tohu matihiko taketake (hei tauira, te whakakā/whakaweto, te tāuru/putanga whakaoho)
-
HDMI/Port WhakaatuMō ngā whakaaturanga mata pa, ngā papatohu kaiwhakahaere rānei
6.2. Ngā Paerewa Hononga Ahokore
Ka taea e te tautoko ahokore te whakahohe waea pūkoro, mamao, rānei uaua ki te waea ngā tāutanga. Ko ngā kōwhiringa rongonui ko:
| Paerewa Ahokore | Whakamahinga Take | Ngā Tuhipoka |
|---|---|---|
| Ipurangi Ahokore | Ngā kiosk hokohoko, ngā whare atamai | Ngāwari te whakauru, te whānuitanga taurite |
| Waea Pūkoro (4G/5G) | Ngā pūnaha o waho, te aroturuki i ngā waka, ngā kiosk | He pono i ngā wāhi tūmatanui |
| Nihokikorangi/BLE | Ngā mea mau, ngā pūoko, te whakamahinga iti o te pūngao | He poto te tawhiti, he penapena pūngao |
| LoRaWAN/NB-IoT | Ahuwhenua, ine i ngā ratonga, tāone atamai | Mana tino iti, tawhiti |
| Zigbee/Z-Wave | Aunoatanga kāinga, whakahaere rama | Ngā āheinga whatunga whatunga |
6.3. Whakaurunga Kapua me te Tapa
He maha ngā wā ka whakatinanahia ngā pūnaha whakauru hou hei wāhanga o tētahi whatunga tohatoha, e hono ana ki ngā tūmau taha rānei ngā papaaho kapua mō te aroturukitanga pokapū me te kohikohi raraunga.
-
MQTT me CoAPNgā kawa māmā mō ngā karere IoT
-
OPC UA / Modbus TCPNgā paerewa mahi tahi a te ahumahi
-
HTTPS/Pūtake TukutukuMō te whakahaere me te aroturuki haumaru i runga i te pūtirotiro
-
Ngā taputapu whakahaere mamaoMō ngā whakahōutanga OTA, ngā tātaritanga, me te takiuru
7. Me pēhea te whiriwhiri i te rorohiko whakauru tika?
Ko te whiriwhiri i te rorohiko whakauru tika me mārama koe ki te taiao o tō tono, ngā whakaritenga mahi, me ngā tumanakohanga mō te roanga o te ora. He rerekē ki ngā rorohiko papamahi, me whiriwhiri ngā rorohiko whakauru i runga i ngā tawhā i hangaia mō tētahi kaupapa, pērā i ngā pāmahana whakahaere me te hototahitanga I/O, kia roa ai te mahi pono i te mara.
7.1. Tautuhia te Whakamahinga o te Taupānga
Ko te taahiraa tuatahi ko te whakatau kei hea, ā, me pēhea ka whakamahia te taputapu:
-
Aunoatanga ahumahiMe whai whānuitanga pāmahana, whakauru/whakaputa raupapa, me te maunga DIN-rail
-
Ngā tātaritanga hauoraMe whai hoahoa kore-pā, kia tutuki i ngā whakaritenga IEC 60601, kia roa hoki te ora
-
Ngā kiosk atamaiMe tautoko i te pāpāho maha, te putanga mata pa, me te Wi-Fi/4G
-
Te whakamahinga waea pūkoro/waka: Me whai urunga ngaohiko whānui, pūoko mura, ātete ru
7.2. Whakatauritehia te Mahi o te Rorohiko ki te Uauatanga o te Mahi
| Momo Mahi | Pūhara e Manakohia ana | Akomanga PTM |
|---|---|---|
| Mana I/O taketake (hei tauira, te whakawhiti whakawhiti) | Pūmana iti, Pūmanawa SoC rānei | ARM Cortex-M/R |
| Aroturukitanga wā-tūturu (hei tauira, te whakakotahitanga pūoko) | SBC Ahumahi | Intel Atom / ARM A72 |
| Te tirohanga mīhini, te AI, te whakatau | Pouaka PC Edge AI | Intel Core / NVIDIA Jetson |
| Mahi maha + GUI (hei tauira, kiosks) | PC papaaho, PC pouaka kore-pā rānei | Intel Core i5/i7 |
7.3. Kōwhiria te Āhua Tika me te Whakamaunga
-
Ngā PC PouakaHe maha ngā whakamahinga, kāore he pā, he pai mō ngā kāpata ahumahi
-
Ngā PC PaewhiriWhakauruhia te whakaaturanga me te rorohiko; e whakamahia ana i roto i te HMI, ngā kiosk
-
Ngā SBC/SoMHe pai mō ngā whakamahinga iti te wāhi, iti te mana
-
Papa pakari, waea pūkoro rāneiMō te hopu raraunga mara me te whakairi waka
Tirohia mō ngā kōwhiringa whakairi: Rēra DIN, VESA, whata, pakitara, whāriki ritenga rānei.
7.4. Whakaarohia ngā hiahia whakauru/whakaputa me ngā hiahia ā-taha
Ko ngā pātai matua mō te whakauru/whakaputa ko:
-
E hia ngā tauranga raupapa, Ngā tauranga LAN, rānei Ngā taputapu USB e hiahiatia ana?
-
Kei te Pahi CAN, PoE, rānei GPIO mea nui mō tō rerenga mahi?
-
Me tautoko rānei te pūnaha mata pa, matawai waehere pae, rānei Pānui RFID?
Me whakarite kei roto i te papa, i te anga rānei ngā kōwhiringa ka taea te whakawhānui (hei tauira, Mini PCIe, M.2, ngā mokamoka SIM rānei) mēnā ka puta pea ngā whakapainga ā muri ake nei.
7.5. Aromatawai i te Whakatutukitanga me te Tautoko i te Huringa Ora
I runga anō i te ahumahi, me tutuki pea i te pūnaha ngā tiwhikete pēnei i:
-
CE/FCC/ULTe whakatutuki i ngā whakaritenga whānui
-
EN50155Ngā pūnaha rerewē
-
IEC 60601Ngā taputapu hauora
-
MIL-STD-810GTe pakari o te taumata hōia
Whakaūtia hoki te te wātea o te tuku mō te wā roa (he maha ngā tau neke atu i te 7) me te tautoko BIOS/pūmanawa.
8. Rorohiko Whakauru me te Rorohiko Whaiaro Noa
Mena kei te rapu koe i tētahi otinga rorohiko he iti, he pono, ā, he mea hanga mō ngā taiao uaua, ko te rorohiko tāmau (e mōhiotia ana ko te PC ahumahi tāmau) te kōwhiringa tino pai. He rerekē ki ngā PC papamahi tuku iho, he mea hanga ēnei pūnaha me ngā hanganga penapena wāhi, he whakamatao kore-pā, he iti hoki te whakapaunga hiko, ā, he tino whai hua mō te mahi roa.
He mea hanga ēnei kia tū atu i te wiri, te puehu, te wai, me ngā pāmahana tino kino, kia mau tonu ai te mahi ahakoa i roto i ngā taiao ahumahi uaua. Mā te whānuitanga o ngā atanga I/O me ngā kōwhiringa whakawhānui ngāwari, ka taea te urutau ngāwari i ngā rorohiko whakauru ki ngā tono i roto i te aunoatanga ahumahi, te pūngao, te kawe waka, te hauora, te haumarutanga, te whakahaere waka, me tua atu.
I te poto, ehara i te mea he iti, he pakari noa iho te rorohiko whakauru—he hoa pono hoki mō ngā ahumahi e anga atu ana ki te IoT, te hanga atamai, me ngā tāone atamai.
| Āhuatanga | Rorohiko Whakauru | Rorohiko Tuku Iho |
| Hoahoa me te Hanga | Ngā wāhanga kiato, pakari, kore-pā, taumata-ahumahi | Āhua-kaihoko, e arotahi ana ki te mahi me te utu |
| Te pono | Teitei, pumau i roto i ngā taiao uaua, ātete wiri/puehu/wai | He āhua noa iho, he pai mō te whakamahi i te tari/i te kāinga |
| Pūnaha Whakahaere | RTOS, Windows IoT, Linux; wā-tūturu me te whakaritenga | Windows, macOS, Linux; whānui-whakamahinga |
| Pūmanawa | Pūmanawa ahumahi: PLC, SCADA, EMS, MES | Tari, pāpāho maha, kēmu, tono whānui |
| Ngā Atanga me te Whanuitanga | Ngā tauranga I/O whai rawa, te whakawhānui ngāwari, ngā atanga motuhake ki te ahumahi | Ngā tauranga paerewa (USB, HDMI), he iti noa te whakawhanuitanga |
| Mana me te Whakamatao | He iti te mana, kāore he pā, he pai ake rānei te whakamatao | Te nui ake o te whakamahinga hiko, he mea whakamatao e te hau |
| Ngā horopaki tono | Aunoatanga ahumahi, pūngao, kawe waka, hauora, IoT | Tari, mātauranga, whakangahau, whakamahinga kāinga |
| Te Huringa Ora me te Tautoko | Te roa o te ora, te tiaki me te whakaritenga a te kaihanga | He poto ake te huringa ora, he tautoko taketake mō ngā kaihoko |
9. Te Tirohanga me te Whakamutunga o te Ao
I te mea kei te haere tonu te hangarau ki te pana i ngā rohe, ngā rorohiko whakauru kei te whanake haere i tua atu i ō rātou tūranga tuku iho. I mua ko te whakahaere me te aroturuki taketake anake, inaianei kei te mahi rātou hei Ngā papaaho taha e whakahohea ana e te AI, ngā miihini tātari wā-tūturu, me ngā pokapū hononga haumaru puta noa i ngā ahumahi. Ehara i te mea he mea whakamīharo anake tō rātou heke mai — engari he tūāpapa hoki mō te ngaru auaha e whai ake nei.
Ngā Pātai Auau
1. Ko ēhea ngā ahumahi e tino whai hua ana mai i ngā rorohiko whakauru?
2. He aha te rerekētanga o ngā rorohiko tāmau i ngā rorohiko tuku iho i runga i te pono?
3. Ka taea e ngā rorohiko tāmau te tautoko i te AI, i te tukatuka raraunga matatau rānei?
4. He aha ngā kōwhiringa hononga e wātea ana mō ngā rorohiko whakauru?
5. Me pēhea taku whiriwhiri i te rorohiko whakauru tika mō taku tono?
LET'S TALK ABOUT YOUR PROJECTS
- sinsmarttech@gmail.com
-
3F, Block A, Future Research & Innovation Park, Yuhang District, Hangzhou, Zhejiang, China
Our experts will solve them in no time.